Is Romex Allowed in Nyc : Expert Opinion

Romex is allowed in NYC as long as it meets the requirements set forth by the New York City Building Code. Romex must be UL listed, have an approved jacket or conduit to protect it from physical damage, and be properly installed according to manufacturer instructions.

Romex can only be used for branch circuits supplying power to lighting fixtures, convenience outlets, and other electrical appliances within a dwelling unit.

If wiring is run through walls or ceilings that are not accessible without tearing them apart, metal-sheathed cables should be used instead of Romex.

Romex wiring is widely accepted in New York City, although some areas may require the use of armored cable or conduit.

There are certain restrictions that must be followed when installing Romex in NYC including the need for a minimum 3-foot distance between exposed wire and any combustible material.

Additionally, all Romex installations must meet local building electric codes as well as National Electric Code standards.

Professional installation is highly recommended to ensure safety and compliance with regulations.

Can I Use Romex in an Apartment Building

Yes, you can use Romex in an apartment building. Romex is a type of electrical wiring that is commonly used within buildings for internal electrical circuits, and it has been approved by the National Electrical Code (NEC) for residential installations.

As long as your local codes permit its use, Romex is a safe and effective way to wire an apartment building.

Nyc Electrical Code

The NYC Electrical Code is the set of regulations governing the use and installation of electrical wiring, equipment, and systems in buildings located within New York City.

This code was created for the safety of people living or working in NYC as well as to protect against property damage due to faulty wiring.

It also establishes guidelines for energy efficiency that must be met when new construction projects are completed.

Adherence to this code is strictly enforced by city inspectors, so it’s important for any contractors or electricians doing work in NYC to know and follow its requirements.

Does Nyc Require Bx Cable

New York City does require Bx cable in certain situations. The NYC Electrical Code mandates the use of Bx cable for branch circuits, such as those supplying lighting or outlets, but not for feeders and services.

In addition, if your building was constructed before 1975 you may need to upgrade all wiring to current code requirements which could include using Bx cable instead of Romex®.

Nyc 2011 Electrical Code Pdf

The NYC Electrical Code for 2011 is available as a PDF download from the New York City Department of Buildings website. This code governs electrical installations in all buildings in the five boroughs of New York City and contains important safety requirements that must be followed.

The most recent version of this code was updated in December 2019, so it’s important to make sure you are using the correct version when performing any electrical work.

National Electrical Code With New York City Amendments

The National Fire Protection Association (NFPA) 70, the National Electrical Code, is a set of safety standards for electrical wiring and equipment in commercial and residential buildings.

It has been adopted by most states as the standard for safe electrical installations across America. In addition to NFPA 70, New York City has made its own amendments specific to its jurisdiction that building owners must adhere to when installing or repairing electrical systems within city limits.

These local NYC amendments ensure that all structures are up-to-date with current technology and meet the highest level of safety requirements possible.

Can You Use Romex in an Apartment?

Yes, you can use Romex in an apartment. Romex is a type of electrical wiring that is commonly used for residential and light commercial applications. It is designed to be run through walls and ceilings without the need to install conduit or other protective fixtures.

This makes it ideal for apartments, as it can easily be installed with minimal disruption to the existing structure. In addition, Romex wire has built-in protection from short circuits and overloads which helps ensure your safety when using electricity in your apartment.

When installing Romex wiring in an apartment, make sure that all connections are secure and properly insulated according to local codes; otherwise you risk creating a potential fire hazard or shock hazard within your home.

Is Romex Wire Illegal?

No, Romex wire is not illegal. In fact, it’s the most commonly used type of electrical wiring in homes and buildings throughout the United States. Romex wire is a type of non-metallic sheathed cable that contains two or more insulated conductors and usually a bare ground conductor as well.

It was developed by Southwire Company almost 70 years ago and has since become an essential part of modern electrical wiring systems. The wires are designed to be flexible yet highly durable, making them perfect for running through walls, floors, ceilings, etc., while still providing adequate protection against electric shock hazards.

Additionally, Romex wire meets all safety requirements set forth by the National Electric Code (NEC), so it can be legally installed in residential and commercial settings without worry of violating any codes or regulations.

Which Areas are Not Permitted to Have Romex Wire Used?

Romex wire is a type of electrical wiring that is commonly used in residential and light commercial settings.

However, there are certain areas where it cannot be used due to safety concerns. These include wet locations such as outdoor or underground installations, as well as damp locations like bathrooms and kitchens.

Romex must also not be run through walls with asbestos insulation, nor should it ever be stapled directly to wall studs or ceiling joists.

Additionally, running Romex wire through any area that could result in physical damage—such as near doorways or windows—is prohibited by most building codes.

Finally, Romex should never be installed outside of an approved electrical box or conduit; doing so can create potential shock hazards for those working around the area.

Following these guidelines will help ensure that your home remains safe from electrical fires and other dangers associated with improper wiring installation.

Can You Use Romex in Residential?

Yes, Romex is an approved wire for residential use in the United States. It is a type of non-metallic (NM) sheathed cable used for electrical wiring in homes and buildings. It has two or three insulated conductors with a bare ground wire enclosed inside an outer plastic jacket.

Romex can be used to expand existing circuits or provide new circuits with power from the service panel, and it’s allowed by most local building codes when installed correctly.

The main advantage of using Romex wiring over other types of wires is that it’s much easier to install because all you have to do is cut away some insulation at the ends and then insert them into your junction boxes, outlet boxes, switches, etc., without needing any special tools like crimpers or strippers.

Furthermore, since it carries multiple wires under one sheath, you don’t have to run separate cables between each outlet which makes installation faster and more efficient as well as being less expensive than buying individual wires for every circuit.


The conclusion of this blog post is that Romex wiring is allowed in New York City. However, it must be installed according to all applicable local codes and regulations. Homeowners should consult with an experienced electrician for proper installation and inspections as needed.

As long as the installation follows all safety protocols, homeowners can use Romex wiring without fear of violation.

Leave a Comment