How To Bleed Propane Line to House

How to Bleed Propane Line to House

Propane gas is commonly used as fuel for heating, cooking, and powering appliances in many households. However, there might be instances where air gets trapped in the propane line, leading to a disruption in the supply of propane to your home. In such cases, it becomes essential to bleed the propane line to ensure a continuous and safe flow of gas. In this blog post, we will guide you through the step-by-step process of bleeding a propane line to your house.

What is Propane Line Bleeding?

Propane line bleeding is the process of removing air from the propane line. Air within the line can cause interruptions in the fuel supply, resulting in appliances not working efficiently or not working at all. Bleeding the line ensures that the propane is flowing smoothly without any air pockets.

Tools and Equipment Needed

Before you start bleeding the propane line, make sure you have the following tools and equipment:

  • Propane wrench/spanner
  • Protective gloves
  • Bucket or container
  • Close-ended wrench
  • Soap solution or propane leak detector

Step-by-Step Procedure

Now that you have gathered the necessary tools, let’s walk through the step-by-step process of bleeding the propane line:

Step 1: Safety First

Propane can be dangerous if not handled properly, so always prioritize safety. Make sure there are no open flames or sparks near the area where you will be working. Ensure proper ventilation to prevent the accumulation of propane gas. Wear protective gloves to protect your hands.

Step 2: Locate The Propane Tank

Find the propane tank outside your house. It is usually located above ground and is connected to a regulator.

Step 3: Turn Off The Gas Supply

Using the propane wrench or spanner, turn the valve on top of the propane tank clockwise to shut off the gas supply. This will prevent any accidental release of gas while bleeding the line.

Step 4: Open The Bleed Screw

Locate the bleed screw on the regulator. It is usually a small screw located on the side or top of the regulator. Use the close-ended wrench to open the bleed screw counterclockwise. This will release the trapped air from the line.

Step 5: Monitor The Release

Place a bucket or container below the bleed screw to catch any residual propane or condensation. Open the bleed screw slowly, and you should hear a hissing sound as the air escapes. If you detect the smell of propane, there might be a leak. In such cases, it is crucial to close the bleed screw immediately and contact a professional for assistance.

Step 6: Check For Leaks

After bleeding the line, it is important to check for any potential leaks. You can do this by using a soap solution or a propane leak detector. Apply the soap solution or leak detector on the connections, fittings, and valves. If you notice any bubbles forming, it indicates a leak. In this situation, turn off the gas supply and seek the help of a professional.

Step 7: Close The Bleed Screw

Once you have verified that there are no leaks, use the close-ended wrench to close the bleed screw by turning it clockwise. Ensure it is securely closed to prevent any gas from escaping.

Step 8: Turn On The Gas Supply

Finally, turn the valve on top of the propane tank counterclockwise to turn on the gas supply. You should now have a properly-bleed propane line with a continuous flow of gas to your house.

Frequently Asked Questions Of How To Bleed Propane Line To House

How Do You Bleed A Propane Line?

To bleed a propane line, start by turning off the gas supply and opening a window for ventilation. Then, using a wrench, loosen the bleeder valve until you hear a hissing sound. Finally, tighten the valve when the hissing stops.

Why Is It Important To Bleed A Propane Line?

Bleeding a propane line is important to remove air and ensure a smooth gas flow. Air in the line can lead to safety hazards and reduced efficiency of your propane appliances.

When Should You Bleed A Propane Line?

You should bleed a propane line when you suspect air has entered the system, such as after a tank change or if you are experiencing weak flame or ignition problems with your appliances.

Can You Bleed A Propane Line Yourself?

Yes, you can bleed a propane line yourself by following proper safety precautions and using the right tools. However, if you are unsure or uncomfortable, it is recommended to seek professional help.

How Long Does It Take To Bleed A Propane Line?

The time it takes to bleed a propane line can vary depending on the amount of air in the system. It usually takes a few minutes to completely bleed the line and restore proper gas flow.


Bleeding the propane line is a necessary step to ensure the smooth functioning and safety of your propane-powered appliances. By following the step-by-step procedure outlined in this article, you can successfully bleed the propane line to your house. Remember to prioritize safety, be cautious of potential leaks, and seek professional help if needed. Regular maintenance and timely bleeding of the propane line will help maintain the efficiency and performance of your propane system.

Leave a Comment