Can I Use Pex for Well Drop Pipe

Yes, you can use PEX for well drop pipe. PEX is a very versatile material that can be used in many water-related applications. It is made from cross-linked polyethylene and provides superior durability to other materials such as PVC or copper.

Additionally, it is lightweight, flexible and resistant to corrosion which makes it an excellent choice for underground installation of water lines such as wells. In addition to being easy to install due to its flexibility, PEX also has low thermal conductivity making it energy efficient when pumping cold water from the ground. Finally, because of the chemical composition of PEX tubing it does not require additional insulation if installed properly and therefore makes for an economical solution for well drop pipes.

  • Measure the drop pipe’s length and diameter: Before using PEX for your well drop pipe, measure the length and diameter of the existing pipe to determine what size you’ll need to purchase.
  • Cut off any damaged sections of the old pipe: Using a hacksaw or other suitable cutting tool, cut away any sections of the old well drop that are no longer usable due to damage or wear.
  • Install a new shutoff valve if needed: If there is not already one installed on the existing well head, install a new shutoff valve at this time before beginning work with PEX piping. This will help protect against potential leaks in case something goes wrong during installation of your new PEX piping system.
  • Attach compression fittings onto each end of your PEX tubing: Compression fittings make it easier to connect two pieces of tubing together without having to solder them together as would be necessary with metal pipes like copper or steel pipes typically used for wells drops . Securely attach these compression fittings onto each end of your PEX tubing according to manufacturer’s instructions; taking special care when tightening them down so they do not leak once installed into place and pressurized with water from your well pump system .
  • Connect both ends of your newly-installed Pex pipeline: Once all compression fittings have been securely attached, connect both ends up by sliding one end inside another (if applicable) then tightening down firmly according to manufacturer’s instructions until tightness is achieved between both connections . At this point , you should now have an operational connection between two points via your newly-installed pex pipeline which can now be used as part of a larger plumbing system such as for carrying water from underground sources directly into homes/buildings etc.

Can I Use Pex for Well Drop Pipe Well Pump

Yes, PEX can be used for well drop pipe and well pump applications. It is a very durable material that stands up to corrosion and abrasion better than other types of piping materials. Additionally, it has excellent heat resistance capabilities so you won’t have to worry about it being damaged by hot water from the well. PEX is also easy to install which makes it an ideal choice for these types of projects.

Can I Use Pex for Well Drop Pipe Reddit

Pex can be used as a drop pipe for well water, however it is important to keep in mind that due to its flexible nature and the pressure of the water it carries, Pex may not always be the ideal solution. For deeper wells, PVC or steel pipes are recommended over Pex due to their increased strength and durability. Additionally, if you do decide to use Pex for your well drop pipe make sure you purchase one that is rated specifically for potable water.

Shallow Well Drop Pipe

A shallow well drop pipe is a type of pipe used to connect the pump and pressure tank in shallow wells. Generally, its length should be equal to or slightly longer than the depth of the well. It is usually made from Schedule 80 PVC with male adaptors on both ends for connecting other types of pipes.

Additionally, it is important to make sure that all connections are securely sealed as any leakage can cause water loss and damage the pump.

1 1/4 Well Drop Pipe

A 1 1/4 well drop pipe is a type of pipe designed specifically for water wells. It’s made from high-grade plastic that is both durable and corrosion resistant, and it’s designed to be used with submersible pumps. This type of pipe has increased pressure resistance compared to standard PVC pipes, making it ideal for deep or narrow boreholes where higher pump pressures are needed to reach the water table. Its slim profile also makes it easier to insert into existing wells than traditional steel casing pipes.

Poly Well Drop Pipe

Poly Well Drop Pipe is a type of drop pipe commonly used in the oil and gas industry for deep well drilling applications. It is made from Polyethylene, which offers superior corrosion resistance to help ensure long-term structural integrity. This type of pipe also features excellent strength and durability, making it ideal for demanding conditions and depths up to 10,000 feet or more.

Additionally, polyethylene is lightweight compared with other materials like steel or PVC making it easier to transport and install.

What Kind of Pipe is Used for Well Drop?

When it comes to well drop pipes, polyvinyl chloride (PVC) is the most commonly used pipe material. It offers several advantages over other materials, including its affordability, durability and resistance to corrosion. PVC is also lightweight compared to metal piping systems and can be easily installed by do-it-yourselfers.

In addition, the smooth walled finish of PVC makes it ideal for preventing dirt and debris from clogging or damaging interior walls of the pipe when water is flowing through them. The cost per foot of PVC well drop pipe runs about $0.50 dollars depending on diameter size; making it a great option for homeowners needing an economical solution for their water source needs. When installing PVC pipes in wells make sure they are securely fastened with connectors at both ends, as this will help prevent any leaks or breaks in the line over time due to stress placed upon them from movement or pressure changes inside the well casing itself.

Where is Pex Not Allowed?

PEX (Cross-linked Polyethylene) is a type of plastic piping that is commonly used in residential and commercial plumbing systems due to its cost effectiveness, durability, flexibility, and resistance to corrosion. However, there are certain locations where PEX is not allowed by law or code. These include areas with high water temperatures such as hot tubs or spas; areas subject to freezing temperatures; direct burial applications outside the building envelope; fire protection sprinkler systems; use in pressure vessels and medical gas systems; and any applications involving contact with petroleum products, compressed air/gases or vacuum lines.

The National Plumbing Code also has specific parameters for when PEX can be used for interior potable water distribution. In addition, some localities may have their own restrictions on the use of PEX piping due to climate conditions or other factors. It’s always important to check your local codes before installing any type of pipe in order to ensure compliance with all laws and regulations governing plumbing installation in your area.

Can Pex Be Used for Underground Water Line?

Yes, PEX (crosslinked polyethylene) can be used for underground water lines. This versatile material is widely used in plumbing due to its durability and flexibility compared to copper pipes. Unlike other types of plastic, PEX remains strong and flexible even when buried under the ground.

Also, it does not corrode or rust like metal pipes do, so it’s a great choice for outdoor applications. Additionally, PEX is less expensive than copper pipe which makes it an economical option for many homeowners and businesses looking to install new water lines. It’s also easy to install since you don’t need any special tools or skills – anyone with basic DIY knowledge can handle this job on their own!

Finally, because of its unique properties, PEX tubing lasts longer than traditional piping materials such as PVC or galvanized steel – up to 50 years in most cases – making it a sound investment that will save you money over time.

What Kind of Pvc Pipe Do You Use for a Well?

When it comes to selecting the right type of PVC pipe for a well, there are several factors that must be taken into consideration. First and foremost is the type of water source being used. If you have a shallow well or spring-fed system, then an ordinary white PVC pipe can be used.

However, if your water source is deeper than 25 feet below ground level, then it’s recommended to use Schedule 40 pressure-rated PVC pipe instead. This type of piping is much thicker and more durable than white PVC pipes since it has been designed specifically for deeper wells where greater water pressures exist. In addition to this, Schedule 40 pressure-rated pipes also come in different sizes to accommodate any size pump you may need for your system.

When installed correctly with proper fittings and seals, these types of pipes will provide years of reliable service when using them as part of a deep well setup.


In conclusion, PEX is a viable option for well drop pipe in certain applications. Depending on the size and depth of the well, it may be necessary to use a different material such as PVC or galvanized steel. It is important to consider all factors involved when selecting piping materials for any project.

With proper installation and maintenance, PEX can provide many years of reliable service as part of your water delivery system.

Leave a Comment