2019 Kia Sorento Blind Spot Detection Not Working

If your 2019 Kia Sorento’s Blind Spot Detection is not working, it could be due to a few possible issues. The first thing to check is whether the system has been turned off. There should be an indicator light on the dashboard that will tell you if it’s enabled/disabled.

If it’s disabled, you can turn it back on via the vehicle settings or by pressing a button located near the rearview mirror. Additionally, make sure all of your sensors are clean and free from any debris or dirt as this can prevent them from properly detecting objects in blind spots. Finally, ensure there are no obstructions blocking either side of your car such as large cargo items that may interfere with detection range and accuracy.

If none of these solutions fix your problem, then you may need to take your car into a dealership for further diagnosis and repair if necessary.

The 2019 Kia Sorento is a great car, but some owners have been reporting issues with the blind spot detection feature. The problem seems to be intermittent and can occur when driving at high speeds or in heavy traffic. If you’re experiencing this issue, it’s important to take your vehicle into your local dealership right away for an inspection and repair as soon as possible.

Not only will this help ensure that your car is safe to drive, but it could also prevent further damage down the line.

How to Reset Bsd System Kia Sorento

If you need to reset your Kia Sorento BSD system, the process is fairly simple. Start by pressing and holding the power button for at least 10 seconds until all of the dashboard lights come on. Then hold down both the brake pedal and accelerator pedal for 12 seconds.

After that, release both pedals then press and hold the power button for another 5-10 seconds until all of the lights go off again. This should have successfully reset your BSD system!

How to Reset Bsd System Kia Sportage

If you need to reset your Kia Sportage’s BSD system, start by turning off the engine and pressing the brake pedal. Next, press and hold the “Select/Reset” button on your dashboard until the system resets itself. Finally, turn the ignition back on and allow the system to reinitialize before driving again.

Following these steps should help ensure that your Kia Sportage’s BSD system is properly reset.

Check Blind-Spot Collision Warning (Bcw) System

The Blind-Spot Collision Warning (BCW) system is a great safety feature for drivers. It helps reduce the risk of accidents by alerting you when there’s an object in your blind spot, such as another vehicle or pedestrian. The BCW system uses sensors to detect objects and will provide a visual warning if something is detected in your car’s blind spots.

This can help you make smarter decisions while driving and prevent potential collisions from occurring.

Kia Bsd System Reset

A Kia BSD system reset is a procedure performed to return the Blind Spot Detection (BSD) system back to its original factory settings. This can be necessary if the sensors become blocked or inaccurate due to dirt and debris buildup, or after an accident involving one of the affected components. Additionally, it can help ensure that all safety features are operating correctly and providing optimal protection while driving.

Blind Spot Detection Kia Optima

The Kia Optima is one of the most popular vehicles on the market, and it comes equipped with a blind spot detection system. This system uses sensors to detect when there is an object in your vehicle’s blind spot, alerting you with visual and audible cues so that you can adjust your positioning accordingly. The Optima’s Blind Spot Detection System also works in tandem with its Rear Cross Traffic Alert technology, providing additional safety for drivers when backing up or changing lanes.

Why Did My Blind Spot Detection Turn Off?

The blind spot detection system on vehicles is a great safety feature that helps drivers avoid collisions with other cars in their blind spots. Unfortunately, this system can sometimes malfunction and turn off unexpectedly. There are several reasons why your vehicle’s blind spot detection may have turned off.

One common cause is an issue with the sensors or wiring of the system itself; if there is something wrong with either of these components, it could affect the operation of the blind spot detection and cause it to stop working altogether. Another possible reason for your vehicle’s blind spot detection turning off could be due to a software update that was installed incorrectly, which would then disable certain features such as this one. Finally, you should also check for any obstructions near your car’s sensor array; if something has been blocking them from functioning properly (such as debris or dirt), then they won’t be able to detect other vehicles in your surrounding area and will subsequently turn off the alert system.

If none of these potential problems seem likely causes behind why your vehicle’s Blind Spot Detection has turned off, you should take it into a certified mechanic right away so they can diagnose and fix any underlying issues before further damage occurs.

How Do You Turn on the Blind Spot Monitor on a Kia Sorento?

Turning on the blind spot monitor for your Kia Sorento is a straightforward process, but one that requires you to be aware of the safety features your car offers. To turn it on, first locate the “BCM/Safety” button, usually found near the center console or in the instrument cluster. Once you press this button, several other buttons may appear.

Find and press the one labeled “BSM/Blind Spot Monitor” (or something similar). This will activate your car’s Blind Spot Monitoring system and allow you to detect vehicles in areas around your vehicle which are not visible from inside of it. When active, an indicator light should appear on each side mirror when another vehicle enters into its detection range and disappear once that vehicle has cleared out of its range again.

You can then rely on these indicators to help ensure safe lane changes without having to worry about unseen cars approaching from behind or passing next door in an adjacent lane.

How Do I Check My Kia Blind Spot Collision Warning?

Checking your Kia blind spot collision warning is an important step in ensuring that you and other drivers are safe on the road. To do so, first make sure your car is parked in a safe place with no traffic or obstacles around it. Next, turn off any additional safety systems that may be activated such as lane departure warnings, forward collision warnings, and rear cross-traffic alerts.

Then activate the blind spot detection system by pressing the button located near the side mirror of your vehicle. Once this has been done you should see a small light illuminate near each side view mirror confirming that the system is active and ready to detect vehicles entering your blind spots. As you drive down the road ensure that when another vehicle enters into one of those spots a warning will sound alerting you to its presence.

If at any point during driving there isn’t a chime or audible alert then check with Kia’s manual for troubleshooting steps for further assistance before continuing on your journey.

Where is the Bsd Sensor on a Kia Sorento?

The BSD sensor on a Kia Sorento is located in the rear of the vehicle near the axle. It is typically mounted behind and slightly below the brake light assembly. The BSD (Blind Spot Detection) system monitors and detects any objects around your car when you’re changing lanes or reversing, alerting you with visual and audible warnings if anything has been detected.

This helps to ensure that you are aware of any potential danger while driving, helping to keep yourself and others safe on the road. To access it for maintenance or repair purposes, you’ll need to remove some trim panels from inside your trunk before reaching the sensor itself.


Overall, the 2019 Kia Sorento Blind Spot Detection system is a great feature that can help drivers to stay safe on the road. Unfortunately, it appears that some Sorentos have experienced this system not working properly and should be addressed as soon as possible. Thankfully there are a few steps one can take in order to attempt to fix this issue themselves before taking it into the dealership for repair or replacement.

It’s important for drivers of all vehicles, especially those with advanced safety features such as blind spot detection systems, to know how they work and what could go wrong so they can troubleshoot any issues quickly and efficiently.

Leave a Comment