2017 Ford Escape Low Beams Not Working

If your 2017 Ford Escape low beams are not working, you may need to check the fuses. Start by checking in the fuse box under the hood and replacing any blown fuses related to lighting. If that doesn’t solve the issue, you should inspect the wiring harness and connections leading from the headlight switch to ensure they’re properly connected and undamaged.

If a problem is still present after these steps, it’s likely that one of your headlights has burned out or there could be an issue with your alternator which will require professional diagnosis.

Are you driving a 2017 Ford Escape and having trouble with your low beams? If so, you are not alone. Many drivers have reported that their low beam headlights do not work properly or at all on the 2017 Ford Escape.

This issue can be caused by a variety of problems, from faulty wiring to blown bulbs and more. It is important to diagnose this issue as soon as possible in order to avoid any potential safety risks associated with impaired visibility while driving at night.

What Would Cause Low Beam Headlights Not to Work?

Low beam headlights not working can be caused by a variety of problems. The most common cause is a blown fuse or bulb, as low beam headlights are often powered using the same circuit. In order to determine if this is the problem, check your fuses and bulbs to ensure that both are still in good condition.

If either has gone bad, replacing them should solve the issue. Another potential cause may be an issue with the wiring harness connecting to the headlight assembly or even corrosion on one of its electrical connectors. This could also prevent power from reaching them properly and result in their failure to light up when switched on.

Inspecting these components for signs of damage should help you diagnose whether this is what’s causing your issues with your low beams not working properly. Finally, make sure that all switches associated with your headlights (including dimmer switch) are functioning correctly and haven’t gotten stuck somewhere between positions due to wear or debris build-up over time. If they have become stuck, simply cleaning them off should get them back into proper operating condition again and restore functionality to your low beams once more!

Why Does My Low Beam Only Work With My High Beam?

Low beams and high beams are both essential components of a car’s lighting system. Low beams provide light for driving in normal conditions, while high beams allow drivers to see further ahead when necessary. In some cases, it may seem like your low beam only works when the high beam is on.

This can be caused by a few different problems. First, you could have a faulty headlight switch that is not sending the correct signals to activate the low beam lights independently from the high beams. It could also be an issue with wiring or connections between parts of the electrical system, such as corrosion or loose connections preventing power from getting where it needs to go.

Finally, if your vehicle has been in an accident recently, there might be damage to certain connectors or wires that prevent either one of your headlights from working properly until they are repaired or replaced altogether. Regardless of what exactly causes this issue in your specific case, make sure you get it checked out by a professional as soon as possible so that you stay safe on the roads!

Where is the Headlight Fuse on 2017 Ford Escape?

The headlight fuse on a 2017 Ford Escape can be found in the main fuse box, located underneath the hood of the car. To access it, open the hood and look for a rectangular black box towards the left side of the engine compartment. There will be several plastic clips along one edge that allow you to remove its lid.

Inside, you should find several rows of fuses with labels indicating their purpose – locate “Headlight Fuse” and make sure it is not blown or damaged before replacing if necessary. It’s important to remember that your vehicle may have additional dedicated fuses under other labeled sections depending on its options; these are usually listed within your owner’s manual so take some time to review relevant information before attempting any repairs on your own!

Why is My High Beam Not Working But Low Beam Works?

If your high beam is not working but the low beams are, it could be due to a few different things. First, you’ll want to check the bulbs themselves; if either of them has blown out or burnt out, that could explain why one is working and the other isn’t. If both bulbs appear to be in good condition, then you may need to look at any wiring issues that may exist between them and the fuse box.

Faulty wiring can cause a lack of power going into either bulb, leading one light to work while another doesn’t. Another potential issue could be with your vehicle’s relay switch; if this switch isn’t functioning properly it won’t allow enough current through for both lights to turn on simultaneously. Lastly, if all else fails, it might just be an issue with your headlight assembly itself; something like corrosion or debris inside the housing unit can prevent a full connection from being made and thus prevent one light from turning on while allowing another light to still come on as normal.

If none of these solutions seem applicable based on what you’ve observed so far with your headlights then we recommend taking your car in for professional diagnosis and repair by a certified technician who will have more information about what might be causing this problem.

2017 Ford Escape Low Beam Relay Location

The 2017 Ford Escape low beam relay is located in the passenger side engine compartment fuse box. The fuse box can be accessed by removing the black plastic trim panel on the right side of the dashboard to expose a rectangular access panel that must be removed with a Phillips head screwdriver. Once this panel is removed, you will find several small fuses and relays; one of which is labeled “Low Beam Relay” and should be marked with an orange wire.

2017 Ford Escape Low Beam Fuse Location

The low beam fuse for the 2017 Ford Escape can be found in the power distribution box located under the hood of your vehicle. To access this box, you will need to remove the driver’s side fender cover and locate a black plastic box that has a hinged lid. The low beam fuse should be labeled on the inside of the box, and it is typically rated at 20 amps.

2017 Ford Escape Headlight Relay

The 2017 Ford Escape Headlight Relay is an essential part of the vehicle’s lighting system, providing power to the headlamps when needed. This relay has been designed for maximum durability and reliability, making it a great choice for any driver who needs dependable headlights. It is easy to install and can be swapped out quickly if necessary, giving drivers peace of mind that their lights won’t fail in critical moments.

2019 Ford Escape Low Beams Not Working

The 2019 Ford Escape has been known to have issues with its low beam headlights not working. If your vehicle is having this issue, it could be due to a faulty headlight switch or wiring harness that needs replacing. You should take your car into an authorized Ford dealership for further inspection and repairs if needed.


In conclusion, if your 2017 Ford Escape low beams are not working, it could be the result of a few different causes. The most obvious is that a fuse may have blown or there’s an issue with the headlight switch itself. It is also possible that the bulbs themselves need to be replaced or that wiring connections have become loose over time.

If none of these solutions fix your problem, it might be best to take your vehicle into a certified mechanic for further inspection and repairs.

Leave a Comment