2014 Kia Optima Brake Lights Not Working

The 2014 Kia Optima brake lights not working is most likely caused by a blown fuse or defective bulb. Check the owner’s manual for the location of the fuse box and replace any blown fuses with new ones of the same amperage rating. Next, use a test light to check that power is getting to each socket where a bulb should be.

If there’s no power, suspect a wiring issue between switch and bulbs, and have it fixed by an auto electrician. If power is present but nothing happens when brakes are applied then bad wiring between brake switch and bulbs might be at fault as well; again get professional help if needed. Finally, replace both rear brake lights with new ones or try swapping one from side-to-side to determine whether one may have gone out prematurely; this will also confirm whether both sides are receiving proper voltage from the switch before replacing bulbs in both sockets .

If you own a 2014 Kia Optima, it is important to keep an eye out for any signs that the brake lights may not be working correctly. This safety feature is crucial for other drivers on the road and should be addressed promptly if there are any issues. Common causes of brake light failure can include faulty wiring, blown bulbs, or problems with the fuse box.

If you notice your brake lights are not working properly in your 2014 Kia Optima, contact a certified mechanic right away to diagnose and repair the issue.

Kia Optima Brake Light Switch Recall

In 2017, Kia issued a recall for the Optima brake light switch due to a potential malfunction that could cause the brake lights to stay illuminated after the brakes are released. The issue may also lead to difficulty in shifting out of park and reduced braking effectiveness. Owners of affected vehicles should contact their local dealer immediately if they experience any issues with their brake lights or have trouble shifting out of park.

2014 Kia Optima Brake Light Switch Replacement

Replacing the brake light switch in a 2014 Kia Optima is not very difficult. The most important thing to do is make sure you have the correct replacement switch for your car model. To begin, you will need to disconnect the negative battery cable and remove the switch from its bracket by using a screwdriver or socket wrench.

Once removed, replace with new switch and reattach it to its bracket. Finally, reconnect the negative battery cable and test that all lights are working correctly before driving away.

2015 Kia Optima Brake Light Fuse Location

The 2015 Kia Optima has a brake light fuse located in the driver’s side kick panel. This is where you will find the fuse box to replace a bad or blown fuse for the brake lights on your Kia Optima. The specific size of this type of fuse is 15-amp, so make sure to check and double-check before replacing with any other type.

Kia Optima Brake Light Switch Location

The brake light switch on a Kia Optima is located at the top of the brake pedal. It can be accessed by removing the lower dashboard panel and disconnecting the harness plug from the back side of it. Once disconnected, simply unscrew and remove the switch to replace it with a new one if necessary.

Kia Optima Tail Lights Not Working

If your Kia Optima’s tail lights are not working, it is likely due to an electrical issue such as a blown fuse or faulty wiring. This can be a safety hazard, so it is important to have the problem addressed by a professional as soon as possible. Regular maintenance and inspections of your vehicle will help prevent issues like this from occurring in the first place.

What Would Cause Both Brake Lights Not to Work?

If both of your brake lights are not working, it could be caused by a variety of issues. The most common cause is a blown fuse or bad wiring connection in the circuit that controls the brake lights. Isolating this issue requires checking each component in the system from the pedal switch to the bulbs and fuses.

If all connections are good, then you will need to check for power at either side of each bulb to ensure that voltage is getting through correctly. Issues with either side can cause both brake lights not to work, so it is important to make sure all connections are in proper working order before moving on. Additionally, if there has been any recent bodywork done on your car, such as painting or dent repair, it’s possible that wires were disconnected during installation and simply need plugging back together properly.

Why Do My Tail Lights Work But Not My Brake Lights?

When you are driving your car and suddenly realize that your tail lights work but not your brake lights, it can be quite alarming. This problem is something that commonly happens in cars, even if the vehicle is relatively new. The reason for this has to do with the electrical system of the car and how it interacts with different components.

Typically, when a brake light isn’t working properly, it could be due to a few things including faulty wiring or bulbs, corroded or damaged sockets/connectors, blown fuses, bad relays/switches and more. In order to determine what might be causing this issue in particular case there are several steps that should be taken: first check all of the bulbs and make sure they aren’t burnt out; then inspect wires around the socket for signs of corrosion or damage; next take a look at fuses in both interior fuse box as well as any under-hood fuse boxes; finally test relay switches by having someone step on their brakes while you observe their dash panel gauges (if these come on then switch is good). If none of these solutions seem like they will solve your problem then it may just require professional help from an experienced mechanic who can diagnose further issues such as bad grounds or shorts in other parts of circuit.

No matter what turns out to be cause behind why tail lights work but not brake lights – remember safety always comes first so never delay repairing an issue like this!

Where is the Brake Light Fuse on a Kia Optima?

The brake light fuse on a Kia Optima is located in the engine bay, typically found near or behind the battery. If you are having trouble locating it, consult your owner’s manual for detailed instructions. To change the fuse, first disconnect both terminals of the battery and remove any body panels as necessary to access the fuse panel.

Once exposed, locate the correct size and type of fuse for your vehicle—this information can also be found in your owner’s manual—and replace with a new one if needed. Be sure to double check that everything is properly connected before turning on power again and testing out your newly changed brake light fuse!

Why are My Brake Lights Not Working When I Press the Pedal?

If your brake lights are not working when you press the pedal, it could be an indicator of a bigger problem with your car’s electrical system. It is possible that either the bulbs in the brake light assembly have burned out, or there may be a loose connection somewhere between the bulb and switch. If this is the case, then you will need to open up your car’s dashboard panel and inspect all wiring connections to ensure they are secure.

Additionally, if you find any frayed wires or corrosion on them, then these should be replaced as soon as possible. In some cases, however, the issue may lie within the brake light switch itself and will require professional help for repair or replacement. Finally, it is important to check all fuses related to lighting systems; often times a blown fuse can cause problems like this one and should always be checked before attempting any other repairs.


This blog post has provided some helpful information about a common issue with the Kia Optima, brake lights not working. It is clear that this problem can be caused by several different issues, ranging from fuses to wiring and bulbs. Fortunately, most of these problems can be fixed relatively easily at home or with the help of a mechanic.

With this knowledge, drivers of Kia Optimas will now have an easier time diagnosing and addressing any brake light problems they may encounter in their vehicles.

Leave a Comment